Long Booster
Long Booster
New generation booster ! Completely VOC-free, even used pure during testing, it gives no positive result in VOC. With an effect for nearly three months, this booster is the fastest of his generation !
Use TEMPO BOOSTER on the rubber only. Repeat the application every 24 hours for a better speed affect. After the last layer, let it dry until the rubber will become flat again. Join the rubber and the blade with water-based glue. Efficient 8 to 12 weeks.
Booster
Booster
A VOC-free booster that gives the same feeling as speed glue for 4 weeks !
Use TEMPO BOOSTER on the rubber only. Repeat the application every 12 hours for a better speed affect. After the last layer, let it dry until the rubber will become flat again. Join the rubber and the blade with water-based glue. Efficient 2 to 4 weeks.
Life Expander
Life Expander
Feeds – Protects – Prolongs – Unglues
It feeds your rubber, keeps the rubber elastic longer. Prolongs the life of speed glue integrated rubbers by 3 fold. Reduces risk of cracking and bubbles. Restores the grip ! VOC free.
For any rubbers: Apply a single layer on the topsheet side between 2 and 4 times a month. Let it penetrate for a few minutes.
For speed glue integrated rubbers : On the topsheet side, apply a layer between 2 and 4 times a month and on the sponge side, apply a layer once or twice a month. Let it penetrate on the sponge for a few hours.
Unglue : Apply a small amount between Falco Water Sheet II and the rubber to help take them off.
Do not apply the FALCO LIFE EXPANDER more than the indicated frequency because the rubber could become engorged. If used correctly, the container should be enough to feed and protect 6 rubbers for 6 months.
Water Glue
Water Glue 10'
Your water-based glue damages your rubbers and your blade when you take off ? Your water-based glue is slow to dry ? Use the Water Glue 10' ! Water-based and natural rubber glue. Easy to take off while maintaining good adhesion between the rubber and the blade !
Put the glue on the rubber and the blade. Let it dry 10'. Assemble the rubber and the blade. Put 2 layers for new rubbers. Affected by frost.